SyncorePlus Application Guide
This application guide describes important aspects of the evaporation of solvents and the concentration of a sample to a predefined volume using the SyncorePlus. Guidelines for the evaporation of your specific solvent and solvent mixtures are presented. They will help you to streamline your own process with sample applications, checklists, hints, rules, tables, and tests.
Your Evaporation Guide – Immersion angle
Achieve higher distillation efficiency when using a rotary evaporator by reading on the impact of immersion angle.
The evaporation rate of a rotary evaporator depends to a large extend on the immersion angle of the evaporating flask. The flatter the immersion angle, the higher the evaporation rate. This is, among other reasons, due to the fact that a flat immersion angle increases turbulence inside the evaporating flask, hence accelerating the evaporation. However, with a flatter immersion angle the evaporating flask cannot be as deeply immersed in the heating bath medium compared with a steep immersion angle. This can be an issue especially working with smaller evaporating flasks. Generally speaking, a 40 degrees immersion angle leads to a maximum efficiency rate without restriction in handling or risking losing parts of the sample due to over spilling and bumping into the receiving flask.
Your Evaporation Guide - Evaporating flask size
Achieve higher distillation efficiency when using a rotary evaporator by reading on the impact of flask size.
Generally, the larger the evaporating flask the greater is the evaporation rate. This is due to the greater turbulence inside a larger flask, enlarging the active surface and leading to a higher evaporation output. On the other hand, smaller flasks are advantageous when the residue needs to be collected for further quantitative analyses. Moreover, larger flasks generally allow easier handling.
Your Evaporation Guide – Thickness of evaporating flask
Achieve higher distillation efficiency when using a rotary evaporator by reading on the impact of thickness of flask.
The evaporation rate is noticeably greater if the evaporating flask’s glass walls are thinner. The simple reason is that thinner glass allows better heat transmission from the heating bath through the glass of the evaporating flask to the solvent. Generally speaking, the glass wall thickness should be selected to be as thin as possible, while still being robust enough to prevent breakages of the evaporating flask even at very low pressures. Concerning both these issues, the optimum thickness for a 1 L evaporating flask is between 1.5 and 2.0 mm.