Yes, it is possible to concentrate multiple samples to a residual volume. The Syncore® Analyst is a parallel work-up product, using three interchangeable racks, to concentrate up to 12 samples down to a pre-defined residual volume, ranging from 0.3 mL, 1mL to 3 mL per sample. The residual volume is collected in a water-cooled appendix at the bottom of the sample vessel. This unique design allows evaporation of heat-sensitive compounds under mild conditions. All relevant parts of the Syncore® Analyst are chemically resistant and free of contaminants.
Yes, high recovery rate can be achieved. In most analytical applications high recovery rates are essential for reliable investigations. The Flushback module for the rack R-6 and R-12 even improves the recovery rate significantly by preventing valuable sample adhering to the glass walls during the evaporation process. In addition, the evaporation process is completely observable due to the innovative crystal rack.
Yes, all relevant parts are chemically inert for a broad range of reagents.
Yes, however, for compounds which are high sensitivity against oxygen, water or other environmental factors it is recommended to evaporate the samples directly.
Conventional solid phase extraction, an essential step in many analytical procedures, includes a number of laborious steps. With the help of the modified parallel evaporator, Syncore® Analyst, all essential work-up steps including evaporation of the elutes are achieved without any sample handling between the individual steps. The key feature is a three-way stopcock which allows separating the liquid passed through a SPE cartridge into either a waste vessel or a collecting vessel. The eluate of the collecting vessel is then evaporated to dryness or a pre-defined residual volume without any sample handling between the SPE work-up stage and evaporation stage.
Solvent recovery is pivotal to comply with environmental regulations. For example, solvent emissions to the lab and the environment have to be avoided. With the Syncore® Analyst up to 99 % of the solvent is recovered. For many processes the recovered solvent can be reused.
The evaporation process can easily be automated by connecting the Syncore® with a condenser to the Vacuum Pump V-300/ V-600 equipped with the Interface I-300/ I-300 Pro. The integrated solvent library of the Interface I-300 Pro as well as the possibility of a gradient mode assist in the daily work and helps to run smooth and safe evaporation processes.
Due to the orbital movement of the Syncore® Analyst the maximum working volume is half of the sample vessel volume.
Cross-Contamination is avoided by directing the vapors of each vessel through the vacuum cover to the vacuum hose. In addition, the vacuum cover is heated in order to prevent sample condensation.