Isocratic Pump System
Isocratic Flash Chromatography - Pump Controller C-610 and Pump Module C-601
Pump Controller C-610:
The Pump Controller C-610 for one Pump Module C-601 is designed for isocratic separations up to 10 bar with a flowrate of max. 250 ml/min. The flow rate can be easily adjusted by turning a knob and is indicated by a large illuminated LCD-display. Delivered with a overpressure sensor for maximum safety.
Pump System:
The Pump Controller C-610 with a Pump Module C-601 is used for fast isocratic Flash separations. No programming is needed. The system can be run by two buttons and one knob.
Fast isocratic Flash and Preparative HPLC separations up to 50 bar - Pump Manager C-615
The Pump Manager C-615:
Designed for both isocratic and gradient separations. Enables a fast operation, easy programming. A large graphical display allows a quick and easy set up. The running time, solvent consumption and actual pressure are shown during a separation for maximum optimization. The unit has Input/Outputs for 2 solvent valves and level sensors and includes a pressure sensor and mixing chamber.
Isocratic Pump System:
The Pump Manager C-615 with one Pump Module C-601/C-605 is used for isocratic Flash separations up to 10 bar (C-601) or for preparative HPLC separations up 50 bar (C-605) with a pulse-free solvent flow up to 250 ml/min for fast and reliable separations. This combination allows exploration into the features of the Pump Manager C-615 for solvent selection, timed runs and solvent level control.
|
1-4 of 4
|
||
|---|---|---|
|
1-4 of 4
|
