Digestion Units K-424/K-435

Rapid and Reliable

The field proven Büchi Digestion units are designed for between 1 to 6 or 1 to 12 samples. The digestion times are typically 20 to 60 minutes depending on quantity and type of sample.

The sample tubes are heated consistently from all sides. This guarantees optimum boiling characteristics without boiling delay. The temperature is easily adjustable up to approx. 650°C. Due to the temperature controls, samples tending to foam can be digested without any problems.

view basket

1-9 of 9

037963

Digestion Unit K-424 (120V)

Digestion unit for six samples with a tight suction module and with a continuously adjustable IR-heating. Metal components made of acid-resistant steel. Complete and ready to use, supplied with 6 sample tubes, 1 suction module, 1 holder and rack for 6 sample tubes, mains cable and operating instructions.

Quantity:

add to basket

040318

Digestion Unit K-424 (120V) with suction module with condensate trap

Digestion unit for six samples with a tight suction module, for aqueous samples, and with a continuously adjustable IR-heating. Metal components made of acid-resistant steel. Complete and ready to use, supplied with 6 sample tubes, 1 suction module with condensation trap, 1 holder and rack for 6 sample tubes, mains cable and operating instructions.

Quantity:

add to basket

037962

Digestion Unit K-424 (230V)

Quantity:

add to basket

038042

Digestion Unit K-424 (230V) with suction module with condensate trap

Quantity:

add to basket

038101

Digestion Unit K-424 TG (120V)

Digestion unit for six 250ml sample tubes from Tecator and/or Gerhardt (supplied without sample tubes).

Quantity:

add to basket

038100

Digestion Unit K-424 TG (230V)

Digestion unit for six 250ml sample tubes from Tecator and/or Gerhardt (supplied without sample tubes).

Quantity:

add to basket

038130

Digestion Unit K-435 (230V)

Digestion unit for twelve samples with a tight suction module and with a continuously adjustable IR-heating. Metal components made of acid-resistant steel. Complete and ready to use, supplied with 12 digestion tubes, 2 suction modules, 2 holders and racks for 6 sample tubes each, mains cable and operating instructions.

Quantity:

add to basket

037674

Digestion Unit K-435 (230V) with suction module with condensate trap

Digestion unit for twelve samples with a tight suction module, for aqueous samples, and with a continuously adjustable IR-heating. Metal components made of acid-resistant steel. Complete and ready to use, supplied with 12 sample tubes, 2 suction modules with condensation trap, 2 racks and holder for 6 sample tubes each, mains cable and operating instructions.

Quantity:

add to basket

038131

Digestion Unit K-435 TG (230V)

Digestion unit for twelve 250ml sample tubes from Tecator and/or Gerhardt (supplied without sample tubes).

Quantity:

add to basket

1-9 of 9

	BÜCHI Labortechnik AG Meierseggstrasse 40 Postfach CH-9230 Flawil 1 Switzerland
www.buchi.com buchi@buchi.com	Tel: +41 71 394 63 63 Fax: +41 71 394 64 64	© 2008 BÜCHI Labortechnik AG